Immediate Transmission - Ricoh C9020L Operating Instructions Manual

using a destination key. This prevents users accidentally sending documents to the wrong destination.
See "Parameter Settings".
• p.115 "Printing a List of Files in Memory (Print TX Standby File List)"
• p.166 "Parameter Settings"
If memory runs out while storing an original
If you run out of memory while storing an original (free space reaches 0%), scanning will be stopped.
If this happens, the "Memory is full. Scanning will be stopped and only scanned page(s) will be stored."
message appears.
Press [Exit] to transmit stored pages only.
• When this happens, only the scanned pages are sent. If you want to delete the scanned pages and
cancel transmission in this case, contact your service representative.
ECM (Error Correction Mode)
If part of a transmission fails because of a line problem, the lost data is automatically resent.
• For this function to work, the other machine must have ECM.

Immediate Transmission

This section explains how to send originals by Immediate Transmission.
• Group cannot be used for Immediate Transmission. You cannot send the same document to multiple
destinations (broadcasting).
• If you specify a second destination or a group after selecting Immediate Transmission, the mode
switches to Memory Transmission.
• If you try to select Immediate Transmission after specifying multiple destinations or a group, the
"Dest. and functions that could not be specified on immediate transmission is already selected."
message appears. When this happens, press [Exit].
Transmission Modes
1
23