Ricoh C9020L Operating Instructions Manual page 816

4. Monitoring and Configuring the Printer
Error: Optional Font
Error: Optional RAM
Error: Parallel I/F Board
Error: PDL
Error: Rem. Certificate Renewal
Error: USB Board
4
Error: USB Interface
Exceed Booklet Stapling Limit
Exceed Stapling Limit
Full: Finisher
Full: Finisher Booklet Tray
Full: Finisher Shift Tray
Full: Finisher Shift Tray 1, 2
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Internal Tray 1
Full: Log Data Capacity
Full: Waste Toner
Full: Waste Toner Bottle 2
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Copier
146
Messages Description
An error has occurred in the font file of the machine.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description
language.
An error has occurred in the remote server renewal.
An error has occurred in the USB interface board.
An error has occurred in the USB interface.
The printing has exceeded the stapling limit of the
booklet finisher.
The printing has exceeded the stapling limit.
Finisher tray is full.
Booklet tray of Finisher is full.
Shift tray of Finisher is full.
The shift tray 1 and 2 of Finisher are full.
Finisher's upper tray is full.
Punch Chip receptacle for hole punch is full.
The internal tray is full.
The log data capacity is full.
The waste toner is full.
The waste toner bottle 2 is full.
It is a hex dump mode.
It did not connect directly with the other party of the
transmission.
An error has occurred while transmitting directly.
The copier is being used.