Changing The User Parameters - Ricoh SP 5200S Operating Instructions Manual

7. Facsimile Features
Switch: 37, Bit: 5
Specify whether or not to limit the file names of documents that are forwarded to folder destinations
to plain characters only
• 0: Off
• 1: On
Switch: 40, Bit: 0
When memory space is insufficient, the machine prints and then deletes the oldest faxes, creating
memory space for storage of new faxes
• 0: On
• 1: Off

Changing the User Parameters

This section describes how to set parameters.
• Access to some User Parameter Settings may require options, or other settings may need to be
made beforehand.
7
• It is recommended that you print and keep a User Parameter list when you program or change a
User Parameter.
• Do not change any bit switches other than those shown on the previous pages.
1. Press [Facsimile Features].
2. Press [Initial Settings].
3. Press [Parameter Setting].
4. Select the switch number you want to change.
5. Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat from step 5 to change another bit number for the same switch.
6. Press [OK].
To cancel these settings, press [Cancel]. The display returns to that of step 4.
7. Repeat step 4 through step 6 to change the switch settings.
8. After all the settings are finished, press [Exit].
9. Press the [User Tools/Counter] key.
384