Specifying A Destination; Sending Over A Fax Line - Ricoh C9020L Operating Instructions Manual

1. Transmission

Specifying a Destination

This section explains how to specify a destination.
1
• The display shows the percentage of free memory space for storing originals. Since fax numbers are
programmed in separate memory, dialing fax numbers using the number keys does not change the
percentage on the display.

Sending over a Fax Line

This section explains how to enter a fax number.
Use the number keys on the right side of the control panel to enter numbers.
1. Enter the fax number using the number keys.
If you make a mistake, press the [Clear/Stop] key, and then enter again.
2. Press the [Start] key.
The machine starts to scan the original and stores it in memory. When scanning ends, the
Communicating indicator lights and transmission starts.
• To specify a destination using a Quick Dial key, see "Using the Quick Dial Keys".
• You can insert pauses and tones in a fax number. For details, see "Entering a pause" or "Entering a
tone".
• For the maximum number of digits for a destination, see "Maximum Values".
• p.41 "Entering a pause"
• p.41 "Entering a tone"
• p.43 "Using the Quick Dial Keys"
• p.193 "Maximum Values"
40