Ricoh C9020L Operating Instructions Manual page 506

6. Fax Features
Switch: 00, Bit: 3, 2, 1
Allows one of five image density steps to be set as the home position.
• 000: Normal density
• 001: The lightest density
• 010: The darkest density
• 101: Lighter density
• 110: Darker density
Switch: 00, Bit: 5, 4
Allows Standard, Details, or Fine to be set as the home position.
• 00: Standard
• 01: Detail
• 10: Fine
Switch: 01, Bit: 1, 0
Allows Text, Photo, or Text / Photo to be set as the home position.
6
• 00: Text
• 01: Photo
• 11: Text / Photo
Switch: 02, Bit: 0
Allows the transmission stamp as the home position to be set to on or off.
• 0: Off
• 1: On
Switch: 02, Bit: 1
Allows either Immediate Transmission or Memory Transmission to be set as the home position.
• 0: Memory transmission
• 1: Immediate transmission
Switch: 02, Bit: 2
Allows the label insertion as the home position to be set to on or off.
• 0: Off
• 1: On
Switch: 02, Bit: 4
Allows the auto reduce as the home position to be set to on or off. When set to on, if the receiver's
paper is smaller than the paper you are sending on, the document is automatically reduced to fit onto
the paper available at the other end.
176