Ricoh C9020L Operating Instructions Manual page 43

See Facsimile Reference
30. Quick Dial Flip Plate
Tilt the plate downward to change from the [Quick Dial 01] key to the [Quick Dial 16] key.
Tilt the plate upward to change from the [Quick Dial 17] key to the [Quick Dial 32] key.
31. [Check Destination] key (facsimile mode)
Press to check the specified destination.
32. [Job Information] key (facsimile mode)
Press to obtain status information on transmitted data.
33. [Search Destination] key (facsimile mode)
Press to search for a destination registered in the destination list.
34. [Memory Trans.] key (facsimile mode)
Press to carry out memory transmission.
See "Transmission Modes", Facsimile Reference
35. [Resolution] key (facsimile mode)
Press to specify the resolution of the fax.
See "Scan Settings", Facsimile Reference
36. User Function keys (facsimile mode)
You can program frequently used functions in these keys under Set User Function Key.
See "Fax Features", Facsimile Reference
By default, the following functions are registered:
[F1] key: Start manual reception
[F2] key: Switch reception mode
[F3] key: Transmission stamp
• p.42 "Display Panel"
• p.48 "Changing Modes"
• p.50 "Turning On/Off the Power"
• p.110 "Counter"
• p.111 "Inquiry"
.
.
.
.
Control Panel
2
41