Getting Started; Guide To Components - Ricoh C9020L Operating Instructions Manual

2. Getting Started

This chapter describes how to start using this machine.

Guide to Components

This section introduces the names and functions of the components.
• Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If
the machine overheats, a fault might occur.
2
1. Auto Document Feeder (ADF)
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
This document feeder can be used for two-sided originals.
2. Main power switch
If the machine does not operate after turning on the operation switch, check if the main power switch is turned
on. If it is off, turn it on.
See "Turning On/Off the Power".
3. Exposure glass
Place originals here face down.
4. Control panel
See "Control Panel".
5. Internal tray 1
Copied/printed paper and fax messages are delivered here.
1
3
4
5
9
6
7
8
BLE033S
2
33