Lan-Fax Operation Messages - Ricoh C9020L Operating Instructions Manual

5. Fax via Computer
Using the Address Book Stored in the Computer for LAN-Fax
1. On the [File] menu, click [Print...].
2. Select the [Printer Name:<LAN-Fax M12>], and then click [Print].
The LAN-Fax dialog box appears.
3. In [Address Book], click [Browse...].
4. Select the Address Book file, and then click [Open].
Select "Machinemodel_addr.csv".
The Address Book appears.
5. Specify the destination.
For details about sending the file, see "Sending Fax Documents from Computers".
5
• p.131 "Sending Fax Documents from Computers"

LAN-Fax Operation Messages

This section explains typical operation error messages displayed on the computer when using the LAN-
Fax Driver, and solutions to those messages.
Message
The number of entries in Destinations
exceed the limits. Up to 300 entries can
be entered.
"LAN-Fax" has already been launched.
Cannot launch it again.
Failed to allocate memory.
148
Causes and Solutions
The number of destinations specified exceeds the maximum
possible. The maximum number of destinations that can be
specified at one time is 300.
The [LAN-Fax] dialog box is already open. Quit LAN-Fax
once, and then start it up again.
Available memory on the computer is insufficient. Quit
applications currently not in use.