Sensors; Iap Sensor Inspection; Tp Sensor Inspection - HYOSUNG 2010 ST7 Service Manual

4-51 EI SYSTEM DIAGNOSIS

SENSORS

⊙ ⊙ PICK-UP COIL INSPECTION
The pick-up coil ① is installed in the magneto cover.
(Refer to page 4-41)
⊙ ⊙ PICK-UP COIL REMOVAL
AND INSTALLATION
● Remove the magneto cover.
● Install the magneto cover in the reverse order of
removal.
⊙ ⊙ IAP SENSOR INSPECTION
The intake air pressure (IAP) sensor ② is installed at
the left side of the throttle body.
(Refer to page 4-29)
⊙ ⊙ IAP SENSOR REMOVAL
AND INSTALLATION
● Remove the fuel tank.
● Remove the IAP sensor from the left side of the
throttle body.
● Install the IAP sensor in the reverse order of
removal.
⊙ ⊙ TP SENSOR INSPECTION
The throttle position (TP) sensor ③ is installed at the
left side of the throttle body. (Refer to page 4-35)
⊙ ⊙ TP SENSOR REMOVAL AND
INSTALLATION
CAUTION
Never remove or adjust the TP sensor.
①
③
②