Combination Meter - HYOSUNG 2010 ST7 Service Manual

COMBINATION METER

Remove the combination meter.
Disassemble the combination meter as shown in
the illustration.
INSPECTION
Using the pocket tester, check the continuity
between lead wires (Blue color coupler and 3 pin
coupler) in the following illustration.
If the continuity measured incorrect, replace the
respective part.
Pocket tester : 09900-25002
Tester knob indication
CAUTION
When making this test, it is not necessary to
remove the combination meter.
: Continuity test (
) )
) )
)
) )
ELECTRICAL SYSTEM 7-16