Starter System Description - HYOSUNG 2010 ST7 Service Manual

STARTER SYSTEM AND SIDE STAND IGNITION INTER-
LOCK SYSTEM

STARTER SYSTEM DESCRIPTION

The starter system consists of the following components : the starter motor, starter relay, clutch lever switch,
side stand switch, neutral switch, starter switch, engine stop switch, ignition switch and battery.
Pressing the starter switch (on the right handlebar switch) energizes the starter relay, causing the contact
points to close, thus completing the circuit from the starter motor to the battery.
START START RELAY
MOTOR
SIDE STAND / IGNITION INTERLOCK SYSTEM DESCRIPTION
This side stand / ignition interlock system prevents the motorcycle from being started with side stand down.
The system is operated by an electric circuit provided between the battery and ignition coil.
The circuit consists of the neutral indicator light and switches.
The ignition coils will send voltage to the spark plugs depending on what gear the transmission is in and
whether the side stand is either up or down.
The gear position and side stand switches work together in this system.
The ignition coil work only in two situations as follows.
BATTERY
INDICATOR LIGHT
NEUTRAL SWITCH
STARTER
SWITCH
ENGINE
SWITCH
CLUTCH LEVER
SWITCH
IGNITION SWITCH
NEUTRAL
DIODE
IGNITION SWITCH
STOP
INDICATOR
SIDE STAND
RELAY
SIDE STAND
RELAY
BATTERY
SIDE STAND SWITCH
ELECTRICAL SYSTEM 7-10
NEUTRAL
NEUTRAL
SWITCH
SIDE STAND
SWITCH
MAIN RELAY
FUSE
IGNITION COIL