Sensors; Iap Sensor Inspection; Tp Sensor Inspection - HYOSUNG AQUILA 650 FI Service Manual

SENSORS

◉ ◉ PICK-UP COIL INSPECTION
The pick-up coil ①
is installed in the magneto cover.
◉ ◉ PICK-UP COIL REMOVAL AND
INSTALLATION
● Remove the magneto cover.
● Install the magneto cover in the reverse order of
removal.
◉ ◉ IAP SENSOR INSPECTION
The intake air pressure (IAP) sensor NO.1 ②
NO.2 ③
is installed at the side of the air cleaner.
(Refer to page 4-1-25)
◉ ◉ IAP SENSOR REMOVAL AND
INSTALLATION
● Remove the fuel tank.
● Remove the IAP sensor from the downside of air
cleaner.
● Install the IAP sensor in the reverse order of
removal.
◉ ◉ TP SENSOR INSPECTION
The throttle position (TP) sensor ④
left side of the throttle body. (Refer to page 4-1-20)
◉ ◉ TP SENSOR REMOVAL AND
INSTALLATION
CAUTION
Never remove the TP sensor.
◉ ◉ WT SENSOR INSPECTION
The water temperature (WT) sensor ⑤
the rear side of the thermostat case.
(Refer to page 4-1-23)
◉ ◉ WT SENSOR REMOVAL AND
INSTALLATION
● Remove the WT sensor.
● Install the WT sensor in the reverse order of
removal.
WT sensor : 18 N∙ ∙ m (1.8 kgf∙ ∙ m)
and
is installed at the
is installed at
47
FISYSTEM DIAGNOSIS 4-1-36
②
④
⑤
①
③