Thermostat; Cylinder Head Cover - HYOSUNG 2010 ST7 Service Manual

THERMOSTAT

Remove the thermostat case ① along with the hose
②.
NOTE
Thermostat inspection and servicing

CYLINDER HEAD COVER

Remove the cylinder head cover.
To set the piston at TDC (Top Dead Center).
CAUTION
Align the index mark on the magneto rotor
with the index mark on the magneto cover as
turn the crankshaft counter-clockwise.
To set piston at TDC(Top Dead Center) of
the compression stroke as align the
mark for front cylinder and the
for rear cylinder.
Remove the cam chain tensioner adjuster
: Refer to page 6-9
F
R mark
.
ENGINE 3-12
①
②
Front Cylinder