Front Fork Spring - HYOSUNG 2010 ST7 Service Manual

● Remove the following parts.
① Oil seal
② Slide metal
③ Oil lock piece
CAUTION
The removed oil seal and slide metal should be
replaced with new ones.
● Loosen the front fork cover bolt.
● Remove the front fork cover.
⊙ ⊙ INSPECTION
▣ ▣ FRONT FORK SPRING
Measure the free length
If the length is found shorter than the service limit,
replace the spring.

Front fork spring

free length
▣ ▣ INNER AND OUTER TUBE
Inspect the inner tube outer surface and outer tube slide
metal ④ face for scratches.
If any defects are found, replace them with a new one.
CAUTION
Don t remove the outer tube slide metal
of the front fork spring.
Service limit
321 mm (12.6 in)
.
CHASSIS 8-24
①
②
③
④