0336" Or "0337" Pick-Up Coil Circuit Malfunction - HYOSUNG 2010 ST7 Service Manual

4-41 EI SYSTEM DIAGNOSIS

"0336" or "0337" PICK-UP COIL CIRCUIT MALFUNCTION

LCD (DISPLAY) INDICATION
0336
0337
DETECTED CONDITION
☞ ☞ Refer to page 4-25
▣ ▣ INSPECTION
1) Remove the frame cover.
2) Turn the ignition switch "OFF" position.
3) Check the pick-up coil coupler ① for loose or poor
contacts.
4) Disconnect the pick-up coil coupler ① and mea-
sure the resistance.
Pick-up coil resistance
Tester knob indication : Resistance (
5) If OK, then check the continuity between each ter-
minal and ground.
Pick-up coil continuity
Tester knob indication : Resistance (
[ 0
[ 0
Ω
110 ~ 140
(G - L)
Ω Ω
)
∞
Ω
(Infinity)
(G - Ground)
(L - Ground)
Ω Ω
)
"FI" CHECK LAMP INDICATION
3 3 6
3 3 7
POSSIBLE CAUSE
● Metal particles or foreign materiel being attached
on the pick-up coil and rotor tip.
● Pick-up coil circuit open or short.
● Pick-up coil malfunction.
● ECU malfunction.
①
0 3 3 6
0 3 3
]
7 ]