Gearshift Shaft - HYOSUNG 2010 ST7 Service Manual

3-21 ENGINE
Remove the pin ① and shim.
With the three screws loosened, remove the oil
pump ②.

GEARSHIFT SHAFT

Draw out the gearshift shaft ③.
Remove the gearshift cam stopper ④
Loosen the gearshift cam plate bolt ⑤
Remove the gearshift cam stopper plate.
Remove the crankcase securing bolts, right and left.
NOTE
Loosen the crankcase bolts diagonally and
smaller sizes first.
②
①
③
⑤
④