HYOSUNG 2010 ST7 Service Manual page 36

FRONT AND REAR BRAKE PAD
REPLACEMENT
Remove the brake caliper.
FRONT BRAKE
Remove the brake pad mounting bolt's E-ring ①.
Remove the brake pad mounting bolts ② and spring ③
REAR BRAKE
Remove the brake pad mounting bolts ④.
Remove the brake pad spring.
CAUTION
Do not operate the brake lever or pedal while dis-
mounting the pads.
Remove the brake pads.
To reassemble, reverse the above sequence.
Front brake caliper mounting bolt
: 18 ~ 28 N m (1.8 ~ 2.8 kgf m)
Rear brake caliper mounting bolt
: 18 ~ 28 N m (1.8 ~ 2.8 kgf m)
NOTE
After replacing the brake pads, pump or press the
brake lever or pedal few times to check for proper
brake operation and then check the brake fluid
level.
PERIODIC MAINTENANCE 2-18
Front Brake
①
③
②
Rear Brake
④
①
②