4-13 EI SYSTEM DIAGNOSIS
B. "FI" CHECK LAMP
To confirm the memorized malfunction code :
1. Turn the ignition switch alternately, "ON" and "OFF" position, for 2 seconds by three times.
Take special care when operating above procedure.
If the ignition switch is turned alternately, "ON" and "OFF" position, for 2 seconds by five times, the ECU is
initialized.
2. The memorized malfunction code is displayed with blinks signal of the "FI" check lamp "
3. Check the malfunction code to determine the malfunction part.
The malfunction code of the "FI" check lamp is displayed both the current code(s) and history code(s).
MALFUNCTION
"NO"
"YES"
CAUTION
NOTE
"FI" CHECK LAMP INDICATION
"FI" check lamp goes off.
Malfunction code is blinked in chronological order.
"
.
KEY