Brake Disk - HYOSUNG 2010 ST7 Service Manual

8-9 CHASSIS
WHEEL BEARING REMOVAL
Remove the wheel bearing by using the special tool.
Wheel bearing remover : 09941-50111
CAUTION
The removed bearing should be replaced with
new ones.
REASSEMBLY AND REMOU-
NTING
Reassemble and remount the front wheel in the reverse
order of removal and disassembly.
Pay attention to the following points :
WHEEL BEARING
Apply SUPER GREASE A to the wheel bearings
before installing.
SUPER GREASE A
Install the wheel bearings as follows by using the
special tools.
Steering race installer : 09941-34513
CAUTION
First install the right wheel bearing, then install
the left wheel bearing.

BRAKE DISK

Make sure that the brake disk is clean and free of any
greasy matter.
Apply THREAD LOCK 1324 to the brake disk
mounting bolts and tighten them to the specified
torque.
THREAD LOCK 1324
Brake disk bolt
: 18 ~ 28 N m (1.8 ~ 2.8 kgf m)