Starter Motor Removal - HYOSUNG 2010 ST7 Service Manual

STARTER MOTOR REMOVAL

AND DISASSEMBLY
Disconnect the starter motor lead wire.
After loosening the bolts ①, remove the starter
motor.
Disassemble the starter motor.
STARTER MOTOR INSPEC-
TION
CARBON BRUSH
Inspect abnormal wear, crack or smoothness of
the brushes in the brush holder.
If the brush has failed, replace the brush sub assy.
COMMUTATOR
Inspect discoloration, abnormal wear or undercut
the commutator.
If the commutator is abnormally worn, replace the
armature.
When surface is discolored, polish it with #400
sand paper and clean it with dry cloth.
ARMATURE COIL INSPECTION
Check continuity between each segment.
Check continuity between each segment and the
armature shaft.
If there is no continuity between the segments or
there is continuity between the segment and shaft,
replace the starter motor with a new one.
Pocket tester : 09900-25002
Tester knob indication
: Continuity test (
) )
) )
①
of
)
) )
ELECTRICAL SYSTEM 7-12
Segment