Configuring 802.1X Key Transmission Time Intervals - Nortel 2300 Series Configuration Manual

Configuring 802.1X Key Transmission Time Intervals

The following command sets the number of seconds the WSS switch waits before retransmitting an EAPoL packet of
key information:
set dot1x tx-period seconds
The default is 5 seconds. The range for the retransmission interval is from 1 to 65,535 seconds. For example, type the
following command to set the retransmission interval to 300 seconds:
23x0# set dot1x tx-period 300
success: dot1x tx-period set to 300.
Type the following command to reset the retransmission interval to the 5-second default:
23x0# clear dot1x tx-period
success: change accepted.
Managing 802.1X on the WSS Switch 493
Nortel WLAN Security Switch 2300 Series Configuration Guide