Using Acls To Change Cos - Nortel 2300 Series Configuration Manual

Wlan security switch
Hide thumbs Also See for 2300 Series:
Table of Contents

Advertisement

374 Configuring and Managing Security ACLs
4
To clear the uncommitted acl-111 ACE from the edit buffer, type the following command:
23x0# rollback security acl acl-111
5
To ensure that you have cleared the acl-111 ACE, type the following command. Only the uncommitted
acl-a now appears.
23x0# show security acl info all editbuffer
ACL edit-buffer information for all
set security acl ip acl-a (ACEs 1, add 1, del 0, modified 0)
----------------------------------------------------
1. permit SRC source IP 192.168.1.1 0.0.0.0
6
Alternatively, to clear the entire edit buffer of all changes made since a security ACL was last committed
and display the results, type the following commands:
23x0# rollback security acl all
23x0# show security acl info all editbuffer
ACL edit-buffer information for all

Using ACLs to Change CoS

For WMM or non-WMM traffic, you can change a packet's priority by using an ACL to change the packet's CoS value.
To change CoS value using an ACL, you must map the ACL to the outbound traffic direction on an AP port, Distributed
AP, or user VLAN.
For example, to remap IP packets from IP address 10.10.20.5 that have IP precedence value 3, to have CoS value 7 when
they are forwarded to any 10.10.30.x address on Distributed AP 2, enter the following commands:
23x0# set security acl ip acl1 permit cos 7 ip 10.10.20.5 0.0.0.0 10.10.30.0 0.0.0.255 precedence
3
success: change accepted.
23x0# set security acl ip acl1 permit 0.0.0.0 255.255.255.255
success: change accepted.
23x0# commit security acl acl1
success: change accepted.
23x0# set security acl map acl1 dap 2 out
success: change accepted.
The default action on an interface and traffic direction that has at least one access control entry (ACE) configured, is to
deny all traffic that does not match an ACE on that interface and traffic direction. The permit 0.0.0.0 255.255.255.255
ACE ensures that traffic that does not match the first ACE is permitted. Without this additional ACE at the end, traffic
that does not match the other ACE is dropped.
320657-A

Advertisement

Table of Contents
loading

Table of Contents