Enabling Radius Pass-Through Authentication - Nortel 2300 Series Configuration Manual

472 Configuring AAA for Network Users

Enabling RADIUS Pass-Through Authentication

The following example illustrates how to enable RADIUS pass-through authentication for all 802.1X network users:
1
Configure the RADIUS server r1 at IP address 10.1.1.1 with the string sunny for the key. Type the
following command:
23x0# set radius server r1 address 10.1.1.1 key sunny
2
Configure the server group sg1 with member r1. Type the following command:
23x0# set server group sg1 members r1
3
Enable all 802.1X users of SSID mycorp to authenticate through pass-through to server group sg1. Type
the following command:
23x0# set authentication dot1x ssid mycorp * pass-through sg1
4
Save the configuration:
WSS-20 save config
success: configuration saved.
(For information about setting up RADIUS servers for remote authentication, see
RADIUS," on page 477.)
320657-A
"Configuring Communication with