Nortel 2300 Series Configuration Manual page 106

106 Configuring and Managing Ports and VLANs
6
Add port 1 to the default VLAN (VLAN 1), configure a VLAN named roaming on ports 19 and 20, and
verify the configuration changes. Type the following commands:
23x0# set vlan default port 1
success: change accepted.
23x0# set vlan 2 name roaming port 19-20
success: change accepted.
23x0# show vlan config
VLAN Name
State
---- ---------------- ------ ----- ----- ---------------- -----
-----
1 default
2 roaming
7
Save the configuration. Type the following command:
23x0# save config
success: configuration saved.
320657-A
Admin VLAN Tunl
Status State Affin Port
Up Up
Up Up
5
1
5
19
20
Port
Tag
none Up
none Up
none Up