Configuring 802.1Q Vlans - Nortel 10BASE-T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Configuring 802.1Q VLANs

To create or modify an 802.1Q VLAN, follow the flowcharts in
Figures
Choose VLAN Configuration (or press v) from the VLAN Configuration Menu
screen to open the VLAN Configuration screen.
A
Select the appropriate PID
value for the PID field.
Is
the PID
user-defined?
Yes
Enter the user-defined
PID value.
Figure C-1. Configuring 802.1Q VLANs (1 of 3)
C-2
C-1 to C-3.
VLAN Configuration screen
3
Select the appropriate value
for the Create VLAN field.
Select the appropriate value
for the VLAN Type field.
VLAN Type
Port-Based?
No
Activate VLAN State.
Start
Is
No
Yes
Key
1
A
Off-page reference
On-page reference
BS41049B
309985-C Rev 00