Displaying Service Profile Information - Nortel 2300 Series Configuration Manual

286 Configuring AP access points

Displaying Service Profile Information

To display service profile information, use the following command:
show service-profile {
Entering show service-profile ? displays a list of the service profiles configured on the switch.
To display information for service profile wpa_clients, type the following command:
23x0# show service-profile wpa_clients
ssid-name:
beacon:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Shared Key Auth:
WPA enabled:
ciphers: cipher-tkip
authentication: 802.1X
TKIP countermeasures time: 60000ms
(For information about the fields in the output, see the Nortel Mobility System Software Command Reference.)
320657-A
name | ? }
nortel ssid-type:
yes auth-fallthru:
<none> WEP Key 2 value:
<none> WEP Key 4 value:
1 WEP Multicast Index:
NO
crypto
web-portal
<none>
<none>
1