Nortel 2300 Series Configuration Manual page 218
Wlan security switch
Hide thumbs
Also See for 2300 Series:
- Reference (622 pages) ,
- Configuration manual (39 pages) ,
- Solution manual (108 pages)
Table of Contents
Advertisement
218 Configuring User Encryption
success: change accepted.
6
Set the SSID in the service profile to voice. Type the following command:
23x0# set service-profile wpa-wep-for-mac ssid-name voice
success: change accepted.
7
Enable WPA in service profile wpa-wep-for-mac. Type the following command:
23x0# set service-profile wpa-wep-for-mac wpa-ie enable
success: change accepted.
8
Enable the WEP40 cipher suite in service profile wpa-wep-for-mac. Type the following command:
23x0# set service-profile wpa-wep-for-mac cipher-wep40 enable
success: change accepted.
TKIP is already enabled by default when WPA is enabled.
9
Enable PSK authentication in service profile wpa-wep-for-mac. Type the following command:
23x0# set service-profile wpa-wep-for-mac auth-psk enable
success: change accepted.
10 Configure a passphrase for the preshared key. Type the following command:
23x0# set service-profile wpa-wep-for-mac psk-phrase "passphrase to convert into a
preshared key"
success: change accepted.
11 Display the WPA configuration changes. Type the following command:
23x0# show service-profile wpa-wep-for-mac
ssid-name:
beacon:
WEP Key 1 value:
WEP Key 3 value:
WEP Unicast Index:
Long Preamble:
WPA enabled:
ciphers: cipher-tkip, cipher-wep40
authentication: pre-shared key
TKIP countermeasures time: 60000ms
pre-shared-key: 92f99cd49e186cadee13fda7b2a2bac78975
a5723a4a6b31b5b5395d6b001dbe
12 Map service profile wpa-wep-for-mac to radio profile rp3. Type the following commands:
23x0# set radio-profile rp3 service-profile wpa-wep-for-mac
success: change accepted.
13 Apply radio profile rp3 to radio 1 on port 4 and to radios 1 and 2 on port 6 and enable the radios, and
verify the configuration changes. Type the following commands:
23x0# set ap 4,6 radio 1 radio-profile rp3 mode enable
success: change accepted.
23x0# set ap 6 radio 2 radio-profile rp3 mode enable
320657-A
voice
ssid-type:
yes
auth-fallthru: last-resort
<none>
WEP Key 2 value:
<none>
WEP Key 4 value:
1
WEP Multicast Index:
YES
Shared Key Auth:
crypto
<none>
<none>
1
NO
Advertisement
Table of Contents
