Viewing Fdb Information; Viewing Arp Information - Nortel 2300 Series Configuration Manual

vlan-name = vlan-wep
mac-user 00:00:65:16:0d:69
session-timeout = 3600
vlan-name = vlan-eng
(For more information about AAA, see
on page 51 and Chapter , "Configuring AAA for Network Users," on page

Viewing FDB Information

The show fdb command displays the hosts learned by the WSS switch and the ports to which they are
connected. To display forwarding database (FDB) information, type the following command:
23x0# show fdb
* = Static Entry. + = Permanent Entry. # = System Entry.
VLAN TAG Dest MAC/Route Des [CoS] Destination Ports or VCs/[Protocol Type]
---- ---- ------------------ ----- -----------------------------------------
130 3 00:05:5d:7e:94:83
130 130 00:02:2d:85:6b:4d
130 130 00:0b:0e:12:34:56
130 130 00:0b:0e:02:76:f6
130 2 00:02:2d:86:bd:38
130 3 00:05:5d:84:d3:d3
4097 00:0b:0e:00:04:30
4096 00:0b:0e:00:04:30
130 00:0b:0e:00:04:30
Total Matching FDB Entries Displayed = 32
dynamic = 27, static=0, permanent=0, system=5
(For more information about forwarding databases, see
page 96.)

Viewing ARP Information

The show arp command displays the ARP aging timer and ARP entries in the system. To display ARP infor-
mation, type the following command:
23x0# show arp
ARP aging time: 1200 seconds
Host
------------------------------ ----------------- ----- ------- --------
10.8.1.1
10.8.107.1
(For more information about ARP, see
Appendix A: Troubleshooting a WS Switch 587
Chapter , "Configuring AAA for Administrative and Local Access,"
#
#
#
"Managing the Layer 2 Forwarding Database" on
HW Address
00:30:b6:3e:5c:a8
00:0b:0e:00:04:0c
"Managing the ARP Table" on page
Nortel WLAN Security Switch 2300 Series Configuration Guide
401.)
1
t:192.168.14.6
t:192.168.15.5
t:192.168.14.6
3
1
CPU
CPU
CPU
VLAN Type
1 DYNAMIC RESOLVED
1 LOCAL
147.)
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
[ALL]
State
RESOLVED