Configuring Aaa For Users Of Third-Party Aps - Nortel 2300 Series Configuration Manual

Last-resort users configured on a RADIUS server require a password. Specify the authorization password (Nortel by
default.) To change the password, see
procedure also applies for last-resort users.
To ensure that your commands are configured, type the following command:
23x0# show aaa
...
set authentication last-resort ssid guestssid local
...
user last-resort-guestssid
vlan-name = k3

Configuring AAA for Users of Third-Party APs

WSS Software Version 4.0 enables an WSS switch to provide network access for users associated with a third-party AP
that has authenticated the users with RADIUS. You can connect a third-party AP to an WSS switch and configure the
WSS to provide authorization for clients who authenticate and access the network through the AP.
example.
Figure 19: WSS Switch Serving as RADIUS Proxy
WSS Switch
"Changing the MAC Authorization Password for RADIUS" on page
Wired Layer 2
connection
Nortel WLAN Security Switch 2300 Series Configuration Guide
Configuring AAA for Network Users 441
Layer 2
or Layer 3
RADIUS server
428. This
Figure 19 shows an