Displaying Radio Profile Information - Nortel 2300 Series Configuration Manual

Displaying Radio Profile Information

To display radio profile information, use the following command:
show radio-profile {name | ?}
Entering show radio-profile ? displays a list of radio profiles.
To display radio profile information for the default radio profile, type the following command:
23x0# show radio-profile default
Beacon Interval:
Max Tx Lifetime:
RTS Threshold:
Short Retry Limit:
Long Preamble:
Tune Channel:
Tune Channel Interval:
Power Backoff Timer:
Countermeasures:
WMM enabled:
Service profiles: default-dot1x, default-clear
(For information about the fields in the output, see the Nortel Mobility System Software Command Reference.)
100 DTIM Interval:
2000 Max Rx Lifetime:
2346 Frag Threshold:
5 Long Retry Limit:
NO Allow 802.11g clients only:
no Tune Power:
3600 Tune Power Interval:
10 Channel Holddown:
none Active-Scan:
yes
Nortel WLAN Security Switch 2300 Series Configuration Guide
Configuring AP access points 287
1
2000
2346
5
NO
no
600
300
yes