Displaying Rf Neighbors - Nortel 2300 Series Configuration Manual

302 Configuring RF Auto-Tuning

Displaying RF Neighbors

To display the other radios that a specific Nortel radio can hear, use the following commands:
show auto-tune neighbors [ap AP-num [radio {1 | 2| all}]]
show auto-tune neighbors [dap dap-num [radio {1 | 2| all}]]
The list of radios includes beaconed third-party SSIDs, and both beaconed and unbeaconed Nortel SSIDs.
To display neighbor information for radio 1 on the directly connected AP access point on port 2, type the following
command:
23x0# show auto-tune neighbors ap 2 radio 1
Total number of entries for port 2 radio 1: 5
Channel Neighbor BSS/MAC
------- ----------------- ----
1 00:0b:85:06:e3:60
1 00:0b:0e:00:0a:80
1 00:0b:0e:00:d2:c0
1 00:0b:85:06:dd:00
1 00:0b:0e:00:05:c1
320657-A
RSSI
-46
-78
-74
-50
-72