234 Configuring AP access points
If an AP does not receive a reply to a DNS request or a request for a system image and configuration after one minute,
the AP starts the boot process over with a new DHCP Discover message, this time from AP port 2.
The following figures show AP boot examples:
•
Figure 12 on page 235
•
Figure 13 on page 236
•
Figure 14 on page 238
an WSS switch and an indirect connection through a Layer 2 network.
320657-A
shows an example of the boot process for an AP connected through a Layer 2 network.
shows an example of the boot process for an AP connected through a Layer 3 network.
shows an example of the boot process for a dual-homed AP that has one direct connection to