Local Authentication For Console Users And Radius Authentication; For Telnet Users - Nortel 2300 Series Configuration Manual

68 Configuring AAA for Administrative and Local Access

Local Authentication for Console Users and RADIUS Authentication

for Telnet Users

This scenario illustrates how to enable local authentication for console users and RADIUS authentication for Telnet
administrative users. To do so, you configure at least one local username for console authentication and set up a
RADIUS server for Telnet administrators. Natasha types the following commands in this order:
23x0# set user natasha password m@Jor
User natasha created
23x0# set authentication console * local
success: change accepted.
23x0# set radius server r1 address 192.168.253.1 key sunFLOW#$
success: change accepted.
Natasha also adds the RADIUS server (r1) to the RADIUS server group sg1, and configures Telnet administrative users
for authentication through the group. She types the following commands in this order:
23x0# set server group sg1 members r1
success: change accepted.
23x0# set authentication admin * sg1
success: change accepted.
23x0# save config
success: configuration saved.
320657-A