Nortel 2300 Series Configuration Manual page 125

Wlan security switch

Hide thumbs Also See for 2300 Series:

Table of Contents

Changing SSH Timeouts

To change the SSH timeout values, use the following commands:

set ip ssh idle-timeout minutes

set ip ssh absolute-timeout minutes

To change the absolute timeout value to 30 minutes, type the following command:

23x0# set ip ssh absolute-timeout 30

success: absolute timeout set to 30 minutes

Managing SSH Server Sessions

Use the following commands to manage SSH server sessions:

show sessions admin

clear sessions admin ssh [session-id]

These commands display and clear SSH server sessions.

If you type the clear sessions admin ssh command from within an SSH session,

the session ends as soon as you press Enter.

To display the SSH server sessions on a WSS, type the following command:

23x0# show sessions admin

3 admin sessions

To clear all SSH server sessions, type the following command:

23x0# clear sessions admin ssh

This will terminate manager sessions, do you wish to continue? (y|n) [n]y

Cleared ssh session on tty3

(To manage Telnet client sessions, see

Configuring and Managing IP Interfaces and Services 125

--------------------

"Logging In to a Remote Device" on page

Nortel WLAN Security Switch 2300 Series Configuration Guide