D Media Cutter Installation; Prepare The Printer - Printronix SL5000 User Manual

Rfid smart label and thermal printers

Hide thumbs Also See for SL5000:

Table of Contents

1. Set the printer power switch to O (Off).

2. Open the peel/tear door by pulling it upward, then forward.

3. Using the appropriate metric hex key, remove the two screws attaching

the peel/tear assembly to the lower support assembly.

NOTE: Keep the two screws you have removed; you will use them to attach

Media Cutter Installation

Figure 1. Peel/Tear Assembly

the cutter assembly to the lower support assembly.

Lower Support

Peel/Tear Door

Show Quick Links

Table of Contents