Printronix SL5000 User Manual page 32

Chapter 1
Setting Up The Printer
If your printer is equipped with the optional Wireless and Optional GPIO it
will appear as illustrated below.
c. Coax Connection
d. Twinax Connection
e. NIC Connection
32
Wireless And GPIO Interface Panel
Attach a suitable coaxial cable from the computer to the coax
connector located in the I/O plate in the back of the printer.
Attach a suitable twinax cable from the computer to the twinax
connector located in the I/O plate in the back of the printer.
Insert a suitable NIC cable from your hub or switch to the NIC
connector located in the I/O panel in the rear of your printer.
Wireless
Antenna
Wireless
Interface
GPIO
Connection