Printronix SL5000 User Manual page 53

IMPORTANT
Do not attach the ribbon to the ribbon take-up spindle without a
fiberboard take-up core installed.
5. Attach the ribbon to the ribbon take-up core on the ribbon take-up spindle
using the adhesive on the ribbon leader.
6. Manually rotate the spindle clockwise until the clear leader has passed
the printhead.
7. Close the pivoting deck and rotate the deck lock lever fully
counterclockwise.
8. Verify that Print Mode (in the QUICK SETUP menu) is set for Transfer.
See "QUICK SETUP" on page 106 for more information.
Loading Ribbon
Media Cover
Media and Ribbon
Loading
Instructions
Ribbon
Take-up Core
Ribbon
Take-up Spindle
53