Printronix SL5000 Quick Setup

Read This First

Printronix RFID SL5000 MP and MP2 printers support a number of RFID
protocols and antenna configurations.
To view a complete list of tag types supported by Printronix RFID SL5000
printers, and a list of Certified RFID Smart Labels available from Printronix:
1. Go to www.printronix.com and select your Country/Language of choice.
2. Under SOLUTION OFFERINGS, click RFID Printers.
3. Under RFID Smart Labels, click View Series.
a. For a complete list of supported RFID tag types,
b. For a list of Certified RFID Smart Labels available from Printronix,
These web pages will be updated regularly to include newly supported RFID
tag types and newly Certified RFID Smart Labels available from Printronix.
To configure your printer to use an RFID tag type, see "Selecting RFID Tag
Types" below.
Selecting RFID Tag Types
For additional information on menu operation, refer to the Quick Setup Guide ,
User's Manual , and RFID Labeling Reference Manual .
To select an RFID tag type:
1. Press the
and into Menu mode.
2. Press ↓ and
3. Press
4. Press ↓ until Tag Type displays.
NOTE: If Tag Type does not display, set Admin User to Enable (in the
179632-001B
Selecting Supported
RFID Tag Types
click Supported RFID Tags.
click Certified RFID Labels.
. .
key on the printer control panel to take the printer offline
.
↵
together until ENTER SWITCH / UNLOCKED displays.
. .
until RFID CONTROL displays.
.
PRINTER CONTROL menu).
1 of 2