Job Control - Printronix SL5000 User Manual

Chapter 3
ETHERNET PARAMS

Job Control

•
Standard (factory default). The NIC waits for the entire job to be received
before it indicates the job is done.
•
Enhanced. The NIC waits for the entire job to be printed before it
indicates the job is done.
•
Off. There is no synchronization between the NIC and the printer.
NOTE: For detailed information about using the NIC, refer to the Network
Offline Process
•
Disable (the default). When set to disable, the printer does not process
parallel/network data while offline.
•
Enable. When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.
260
Interface Card User's Manual .