Printronix SL5000 User Manual page 158

Chapter 3
PRINTER CONTROL
Standard Chars.
This menu entry permits you to adjust the thickness or font weight of standard
text fonts.
The factory default is 340 and the range is from 0 to 512.
Bold Chars.
This menu entry permits you to adjust the thickness or font weight of bold text
fonts. This menu will not take effect unless you save it in a configuration and
the printer is powered up with that configuration.
The factory default is 448 and the range is from 0 to 512.
Extra Bold Char.
This menu entry permits you to adjust the thickness or font weight of extra
bold text fonts.
The factory default is 504 and the range is from 0 to 512.
NOTE: For most applications, the default settings for font memory are
OCR-A Chars.
Character weight adjustment of resident OCR-A characters.
The factory default is 384 and the range is from 0 to 512.
OCR-B Chars.
Character weight adjustment of resident OCR-B characters.
The factory default is 304 and the range is from 0 to 512.
Tall Characters
Increases the point height of resident Intellifont characters.
•
Enable. Increases the point height of resident Intellifont characters
approximately 10%.
•
Disable. Standard resident font character point height is maintained.
The factory default is Disable.
158
acceptable. Therefore, do not change the defaults unless your
application requires an uncommon memory configuration.