Printronix SL5000 User Manual page 97

COAX
2, 3, 7
SETUP
(page 164)
Primary Sets
Primary Sets
Translation Tbl
Translation Tbl
PA1
Buffer Print
PA2
Twinax Type
Buffer Reprint
Active Char Set
Buffer Print
Secondary Sets
Coax Type
5225 World Trade
Active Char Set
Cancel IGP/DCU
Secondary Sets
Lead-in Chars
Early Print Cmpl
User-Defined St1
SCS Buffer Cntrl
User-Defined St2
Alt. Set 80-9F
User-Defined Stp
Intervention Req
Alt. Set 80-9F
CR At MPP + 1
Graphic Chek Err
NL At MPP + 1
Graphic Chek Cod
Position Aft FF
LAC Option
Last Char = FF
LAC Approx.
Null Suppression
Set Text Orientn
FF Validity
Host Override
Auto Skip At End
Format Control
FF After Job
Max. Print Width
CR, EM, & NL
Translate Table
Host Override
Format Control
Cancel IGP/DCU
Lead-in Chars
5
User-Defined St1
5
User-Defined St2
5
User-Defined Stp
Change Case
Set Text Orientn
Max. Print Width
NOTES:
Italicized items are available only when Admin User is set to Enable (in the PRINTER CONTROL menu).
1
Gap/Mark Sensor and Paper Out Sensor work in conjunction, as shown in Table 6 on page 138. If you
change the Gap/Mark Sensor or Paper Out Sensor, you must recalibrate the media.
2
Appears only if the CTHI option is installed.
3
Appears only if selected as the Port Type (under C/T PORT).
4
Appears only if the CTHI emulation (under PRINTER CONTROL) is set to Simp Prot Conv.
5
Appears only if the "User Defined" option in the "Lead-in Chars" menu is selected.
6
Does not appear if IPDS is installed.
7
Does not appear if CTHI emulation (under Printer Control) is set to Simp Prot Conv..
TWINAX
2, 3, 7
SETUP
(page 167)
SPC Type
6
Logical Buf Size
Intervention Req
Buffer Print
Translation Tbl
PA1
PA2
Buffer Reprint
Null Handling
5
SPC Null Supp
5
SPC Space Supp
5
SFCC Char
User-Defined St1
User-Defined St2
User-Defined Stp
NL At MPP + 1
SPC COAX
2, 3, 4
SETUP
(page 169)
SPC Type
SFCC Char
User-Defined St1
User-Defined St2
User-Defined Stp
SPC Char Set
Translation Tbl
Buffer Print
5
5
5
SPC TWINAX
2, 3, 4
SETUP
(page 170)
5
5
5
97