Setting The Power Amp Direct Mode; Turning Power Amp Direct Mode On; Turning Power Amp Direct Mode Off - Denon PMA-1520AE Owner's Manual

Contents

Setting the power amp direct mode

When a pre-amplifier is connected to this unit and the unit is used as a
power amplifier, follow the instructions below to turn power amp direct
mode on.
POWER AMP DIRECT
Front panel Rear panel
Connections Playback
Remote
Settings

Turning power amp direct mode on

1
Press POWER AMP DIRECT on the main unit.
• By switching this on, it is possible to play back a device connected
to the Power Amp Direct connector on the rear panel. In this case,
the input indicator is turned off.

Turning power amp direct mode off

1
Press POWER AMP DIRECT on the main unit.
• By switching it off, it is possible to play back the program source
selected using the INPUT SELECTOR knob. In this case, the input
indicator lights up.
NOTE
• When the power amp direct mode is on, adjustment of the volume, balance and
tone on the main unit has no effect. Adjust the volume on the pre-amplifier.
• When the power amp direct mode is on, the main unit outputs at maximum
volume. Check the output level on the input device before playing it and adjust the
volume accordingly.
27
Index
Tips Appendix