Front Seat - Ford 2002 Bantam Workshop Manual

501-10-3
REMOVAL AND INSTALLATION

Front Seat

E9364 EN
Seating
Removal
Vehicles with driver air bag
WARNING: To avoid accidental deploy-
ment the air bag control module backup
power supply must be depleted. Wait at
least one minute after disconnecting the
battery ground cable(s) before com-
mencing any repair or adjustment to the
supplemental restraint system (SRS), or
any component(s) adjacent to the SRS
sensors. Failure to follow these instruc-
tions may result in personal injury.
WARNING: Always wear safety glasses
when working on an air bag equipped
vehicle and when handling an air bag
module. Failure to follow these instruc-
tions may result in personal injury.
1. Disconnect the battery ground cable. For
additional information,
All vehicles
2. Remove the head restraint.
3. Detach the seat side trim panel from the
seat track.
501-10-3
refer to Section 414- 01.
07/2001 2002 Bantam