The Flash-To-Pass Feature Is Inoperative - Ford 2002 Bantam Workshop Manual

BACK TO CHAPTER INDEX
417-01-25
DIAGNOSIS AND TESTING (CONTINUED)
F12: CHECK THE INSTRUMENT CLUSTER
1.
PINPOINT TEST G: THE FLASH-TO-PASS FEATURE IS INOPERATIVE
G1: CHECK THE HIGH BEAM HEADLAMPS FOR PROPER FUNCTION
E9418 EN
CONDITIONS
2.
Instrument cluster
C37a
CONDITIONS
1.
Exterior Lighting
DETAILS/RESULTS/ACTIONS
4 Check if the left-hand high beam headlamp is
on continuously.
• Is the left-hand high beam headlamp on
continuously?
Yes
GO TO F12
No
REPAIR the short to power, circuit(s) con-
nected with the relay – high beam, connec-
tor C5, pin 3, by using the wiring diagrams.
TEST the system for normal operation.
3.
4 Check if the left-hand high beam headlamp is
on continuously.
• Is the left-hand high beam headlamp on
continuously?
Yes
REPAIR the short to power, circuit(s)
connected with fuse F21, by using the wiring
diagrams. TEST the system for normal
operation.
No
CHECK the instrument cluster. If necessary
INSTALL a new one. TEST the system for
normal operation.
DETAILS/RESULTS/ACTIONS
FORD BANTAM PAGES FROM MANUAL
TO MODEL INDEX
CONTINUED
07/2001 2002 Bantam
417-01-25