501-14-10
REMOVAL AND INSTALLATION
Exterior Door Handle (41 333 0)
E5848 EN
Handles, Locks, Latches and Entry Systems
Removal
1. Disconnect the battery ground cable.
2. Remove the door trim panel. For additional
information,
refer to Section 501-05.
3.
CAUTION: Do not touch watershield
adhesive surfaces, as re-bonding will
be impaired.
Locally detach the watershield.
• Using a plastic knife, (disposable cutlery)
cut through the butyl strip to enable the
protective sheet to be peeled back for
access. Do not attempt to peel the sheet
from the door without cutting the butyl.
4. Detach the window guide runner and lock
shield (two screws).
5. Remove the window guide runner.
501-14-10
08/2001 2002 Bantam