Sensor (Staging Inner Transport 1) Removal - Lexmark CX825 Service Manual

5
Cut the two cable ties (A), and then disconnect the cables.
6
Release the cables from their guides, and then remove.
Installation note: Make sure that the elevator bin can properly move to its topmost and bottommost
positions.

Sensor (staging inner transport 1) removal

1
Remove the multiposition stapler assembly. See
2
Disconnect the cable (A), and then remove the screw (B).
Warning—Potential Damage: Do not bend the sensor bracket, or it may deform.
A
Repair information
"Multiposition stapler assembly removal" on page
1182
7564
1114.