Stapler bin lower exit roller pulley gear removal
1
Remove the multiposition stapler assembly. See
2
Remove the stapler bin lower exit roller belt. See
1144.
3
From the front, release the latch (A), and then remove the pulley gear.
Compiler entrance guide removal
1
Remove the multiposition stapler assembly. See
2
Remove the compiler paddle and exit drive. See
1140.
3
Disconnect the interface board cables, and then release the cables from the frame.
"Multiposition stapler assembly removal" on page
"Stapler bin lower exit roller belt removal" on page
"Multiposition stapler assembly removal" on page
"Compiler paddle and exit drive removal" on page
Repair information
1145
7564
1114.
A
1114.