Ricoh D146 Service Manual page 1884

File No. printing
3 0: Enabled
1: Disabled
Action when authorized
reception is enabled but
authorized RTIs/CSIs are not
4 yet programmed
0: Faxes can be received if the
sender has an RTI or CSI
1: All fax reception is disabled
5-7 Not used
* This setting can be used for the remote machine.
D163
1: File numbers are not printed on any reports.
NOTE: The file numbers may not be printed in
the sequential order. If a customer does not like
this numbering, select "0".
0: If the user has stored no acceptable sender
RTIs or CSIs, the user can select "ON" in the
authorized reception setting but the setting
becomes invalid ("OFF"). The machine will not
be able to receive any fax messages.
If the customer wishes to receive messages
from any sender that includes an RTI or CSI,
and to block messages from senders that do
not include an RTI or CSI, change this bit to
"0", then enable Authorized Reception.
Otherwise, keep this bit at "1 (default setting)".
Do not change the settings
108 SM