Ricoh D146 Service Manual page 1940

No.
Network I/F setting for SIP
connection
0
0: IPv4
1: IPv6.
Network I/F setting for Fax
communication
1 0: Same setting as SIP server
connection
1: Automatic setting
Record-route setting
2 0: Disable
1: Enable
re-INVITE transmission delay timer
setting
Bit 4
0
3-4
0
1
1
SIP-IPFAX: Adding vender
information selection
5 0: Declare T38VendorInfo=RICOH
1: Not declare
T38VendorInfo=RICOH
6-7 Not used.
D163
IP Fax Switch 09 (SP No. 1-111-010)
Function
Bit 3
0 No delay
1 1 sec
0 2 sec
1 3 sec
Comments
Selects the connection type (IPV4 or IPV6)
to connect to the SIP server.
0: The I/F setting for fax communication
follows the setting for SIP server
connection.
1: The negotiation between the SIP server
and the device decides whether IPv4 or
IPv6 is used for the I/F setting for fax
communication.
0: Disables the record-route function of the
SIP server.
1: Enables the record-route function of the
SIP server.
This changes the interval for transmit
re-INVITE after receiving the ACK message
transmitted by T.38 device.
0: Use this setting normally.
1: This setting is used only when a
customer wants to connect the machine
with SIP server + VOIP-GW provided by
AVAYA Inc.
Do not change these settings.
164 SM