Ricoh D146 Service Manual page 1911

No Function
0 Not used
Optional G3 unit (G3-2)
1 0: Not installed
1: Installed
2 Not used
Select PSTN connection
3 0: Off
1: On
4-7 Not used
No Function
SEP reception
0 0: Disabled
1: Enabled
SUB reception
1 0: Disabled
1: Enabled
PWD reception
2 0: Disabled
1: Enabled
3-4 Not used
PSTN dial-in routing setting
5 0: OFF
1: ON
SM
Communication Switch 16 (SP No. 1-104-023)
Do not change the settings.
Change this bit to 1 when installing the first
optional G3 unit.
This switch enables the G3-2.
0: Off, no connection
1: Recognizes and enables G3-2.
This switch can be used only after G3-2 has been
installed.
Do not change the settings.
Communication Switch 17 (SP No. 1-104-024)
0: Polling transmission to another maker's
machine using the SEP (Selective Polling) signal
is disabled.
0: Confidential reception to another maker's
machine using the SUB (Sub-address) signal is
disabled.
0: Disables features that require PWD
(Password) signal reception.
Do not change the settings.
1: The machine sets multiple PSTN dial-in
numbers in the PSTN dial-in line and transfers
received data from each PSTN dial-in number to
each address.
Comments
Comments
135 D163